Courses from providers in Ireland and online. Build Digital does not endorse any course or guarantee its quality or suitability, so carry out your own due diligence before you enrol.
7 courses fit Mechanical Installer. They are listed first, each with the reason.
Industry 4.0 Skillnet
Revit Architecture Essentials
Open for bookingProfessional training
Level
Not stated
Length
5 consecutive days
Where
Online
Cost
€600 · funding available
Fits Mechanical Installer: authoring and coordination
The course will provide learners with a solid grounding in Building Information Modelling (BIM) using Autodesk’s Revit. Throughout the course, candidates will be shown how to set up a Revit project and create a 3D architectural model, complete with associated documentation. As part of the creation of the 3D model, you will be able to achieve a realistic architectural visualisation of the completed project.
More about this course+
Fee and funding
Full Price: €600; I4S Price: €420; Eligibility Criteria: Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
Length
5 consecutive days, 2 hour sessions per day (from 10am to 12pm or from 2pm to 4pm)
Dates
5 consecutive days, 2 hour sessions per day (from 10am to 12pm or from 2pm to 4pm)
Fits Mechanical Installer: modern methods and offsite construction
The course develops the skills required by industrial maintenance technicians to safely diagnose and repair faults in electrically controlled production equipment. We offer a uniquely practical course focused on replicating real-life scenarios using specialist industrial equipment and troubleshooting simulation software.
More about this course+
Fee and funding
Full Price €1,550, I4S Price €640. Funded through the ESF+ programme co-funded by the Government of Ireland and the European Union, available to Irish Private Sector and registered Sole Traders.
Length
6 Days
Dates
Funding available to Irish private-sector professionals and registered sole traders
Fits Mechanical Installer: authoring and coordination
As a result of attending this training you will be able to understand Revit’s interface and terminology, set up and begin a project, analyse your building model for performance, such as heating and cooling, create and modify ductwork, layout and create system piping, plumbing systems, fire protection systems and electrical circuits.
More about this course+
Fee and funding
Full Price: €600, I4S Price: €420. Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
Length
5 consecutive days, 2 hour sessions per day (from 10am to 12pm or from 2pm to 4pm)
Fits Mechanical Installer: modern methods and offsite construction
The Diploma in Manufacturing Automation equips students with the skills and knowledge required to work with automated tools in the manufacturing industry. Learners will gain a solid understanding of manufacturing automation and programming through both theoretical study and practical application. Designed for those looking to operate, manage, and troubleshoot automated systems, this course provides essential hands-on experience to prepare graduates for careers in modern manufacturing.
More about this course+
Fee and funding
Annual Fee €2,770; Per Semester Fee: €1,385; I4S 30% funding = €969.50. Funding is limited and subject to availability at time of request. Eligibility Criteria: Funding is available only to successful candidate employed in the Irish Private Sector and registered Sole Traders, not individuals.
Pneumatic and Vacuum Technology Course – QQI Level 6
Dates not publishedCertificate
Level
NFQ 6
Length
6 days
Where
In person
Cost
€1,550 · funding available
Fits Mechanical Installer: modern methods and offsite construction
Become confident with troubleshooting and maintainingPneumatic and Vacuum systems. Get the theoretical knowledge, practical experience and thinking skills to maintain, set-up, align, tune, navigate and fault-find pneumatic and vacuum machine technologies. Custom designed training rigs and pick and place machine systems allow users to get hands-on with pneumatic systems, fostering a deep comprehension of their operation, troubleshooting and maintenance.
More about this course+
Fee and funding
Full Price: €1,550; I4S Price: €1,085. Eligibility Criteria: Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
Length
6 Days
Dates
Funding available to Irish private-sector professionals and registered sole traders
Recognition
QQI Level 6 Minor Award in Pneumatic and Vacuum Technology
Postgraduate Certificate in Modern Methods of Construction
Dates not publishedPostgraduate certificate
Level
Level 9
Length
One academic year
Where
Online
Cost
€4,250 · funding available
Fits Mechanical Installer: modern methods and offsite construction
This 30 ECTS credit Level 9 Postgraduate Certificate in Modern Methods of Construction focuses on the latest advancements and sustainable practices in the construction sector. Delivered in a fully flexible format to accommodate working professionals, this one-year course offers modules in Sustainability Planning in Construction, Digital Construction Technologies and Modern Methods of Construction.
More about this course+
Fee and funding
Annual Fee €4,250; Per Semester €2,125; I4S 30% funding €1,487.50; Funding is limited and subject to availability at time of request; Funding is available only to successful candidate employed in the Irish Private Sector and registered Sole Traders, not individuals.
Programmable Logic Controllers – Allen Bradley Course
Dates not publishedCertificate
Level
NFQ 6
Length
6 days
Where
In person
Cost
€1,550 · funding available
Fits Mechanical Installer: modern methods and offsite construction
PLC’s are at the centre of modern automation systems. If you can understand how PLC’s think and how they generate fault messages, then you can use them as a powerful diagnostic tool. Our PLC course will enable maintenance staff to interrogate PLC code to determine the cause of machine faults and hang-ups. The course is run using Allen Bradley PLCs and is intended for learners already familiar with RSLogix. If you are a beginner, we recommend you complete the Introduction to PLC’s module
More about this course+
Fee and funding
Full Price: €1,550; I4S Price: €1,085. Eligibility Criteria: Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
This Introduction to Renewable Energy course developed by the Irish Manufacturing Research will provide an overview of green energy technologies available in the market for the decarbonisation of industry. Participants will be able to identify suitable energy optimisation strategies for their company which take into account the company’s site settings, operational requirements and available resources.
More about this course+
Fee and funding
Full Price: €1,000, I4S Price: €400. This Industry 4.0 Skillnet course is funded through the ESF+ programme which it is a social funding initiative co-funded by the Government of Ireland and the European Union ( www.eufunds.ie) aimed at promoting awareness and advocating for equal opportunities for all individuals to undertake upskilling or reskilling and advance their careers. Funding is available to ALL professionals employed in the Irish private sector and to Sole Traders.
Length
2 Days
Dates
Funding available to Irish private-sector professionals and registered sole traders
The BSc in Quantity Surveying degree programme offers graduates a broad skills base for the specialised profession of quantity surveying. The need for quantity surveyors is vital for the efficient cost management of construction projects. The evolving international economic climate means the role of the quantity surveyor is in high demand as both public and private clients are pursuing the agenda of obtaining value for money and greater cost certainty in all construction activities.
More about this course+
Fee and funding
Yearly Fee €3,450; Per Semester Fee: €1,725; I4S 30% funding = €1,207.50. Funding is limited and subject to availability at time of request. Eligibility Criteria: Funding is available only to successful candidate employed in the Irish Private Sector and registered Sole Traders, not individuals.
This is a 2 years Construction Economics programme at Level 6 Higher Certificate add-on course designed for those currently working in the construction industry who wish to develop their career. The course offers graduates a broad skills base for the management of construction projects with a strong emphasis on cost.
More about this course+
Fee and funding
Annual Fee €2,700; Per Semester Fee: €1,350; I4S 30% funding = €945. Funding is limited and subject to availability at time of request. Eligibility Criteria: Funding is available only to successful candidate employed in the Irish Private Sector and registered Sole Traders, not individuals.
This module will cover the broad areas of building information modelling (BIM) technology, digital twinning, visualisation methods and their standard approaches within the construction sector. Digitalisation will fundamentally change the ways in which construction teams interact. Technologies such as BIM will seamlessly monitor the materials and products delivered to the construction site, in a manner that respects the need for sustainability and traceability. Furthermore, sensors will provide the data for digital twins and their incorporation into construction elements, thus the ability to analyse and exploit the large volumes of data is required.
More about this course+
Fee and funding
Course Fee €1885; I4S 30% funding = €1,319.50. Eligibility Criteria: Funding is available only to successful candidate employed in the Irish Private Sector and registered Sole Traders, not individuals.
AI Mastery for Industry is a hands-on, in-person workshop built around the work you do every day. Estimating jobs, running programmes, keeping sites safe, controlling commercial risk, and keeping plant running. Each module is a live demonstration on real industry data, not a vendor pitch and not a generic productivity talk.
More about this course+
Fee and funding
Full Price: €360; I4S Price 50% funding: €180. Eligibility Criteria: Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
Length
1/2 day in person + 30 minutes online follow up session (one week after the course for any Q&A )