Courses from providers in Ireland and online. Build Digital does not endorse any course or guarantee its quality or suitability, so carry out your own due diligence before you enrol.
64 courses fit Consulting Design Engineer. They are listed first, each with the reason.
National Construction Training Campus – Mount Lucas
NZEB External Wall Insulation
Dates not publishedProfessional training
Level
NFQ 5
Length
5 days onsite delivery
Where
Blended
Cost
Fully funded
This course aims to provide participants with the knowledge and skills to apply external wall insulation (EWI) using best practices. At the end of this course, successful learners will have received the theoretical and practical training required to be able to participate in the preparation, setting out, and practical application of EWI as part of a retrofit project.
More about this course+
Fee and funding
This course is fully funded through the Skills to Advance programme
Length
5 days onsite delivery (1 day theory + 4 days practical)
National Construction Training Campus – Mount Lucas
NZEB Fundamentals for Site Supervisor
Dates not publishedProfessional training
Level
Not stated
Length
4 days
Where
In person
Cost
Fully funded
This course aims to provide participants with the principles and practices required to effectively supervise the construction of dwellings to achieve Nearly Zero Energy Building compliance.
More about this course+
Fee and funding
This course is fully funded through the Skills to Advance programme
National Construction Training Campus – Mount Lucas
NZEB Retrofit Skills
Dates not publishedProfessional training
Level
Not stated
Length
5 days onsite delivery
Where
In person
Cost
Fully funded
This course aims to provide participants the knowledge and skill to insulate a building using best practices. This includes internal, external, floor and roof insulation. Participants will also learn how to make a building airtight to minimise unwanted energy losses.
More about this course+
Fee and funding
This course is fully funded through the Skills to Advance programme
Length
5 Days Onsite Delivery ( 1 day theory + 4 days practical)
Pneumatic and Vacuum Technology Course – QQI Level 6
Dates not publishedCertificate
Level
NFQ 6
Length
6 days
Where
In person
Cost
€1,550 · funding available
Become confident with troubleshooting and maintainingPneumatic and Vacuum systems. Get the theoretical knowledge, practical experience and thinking skills to maintain, set-up, align, tune, navigate and fault-find pneumatic and vacuum machine technologies. Custom designed training rigs and pick and place machine systems allow users to get hands-on with pneumatic systems, fostering a deep comprehension of their operation, troubleshooting and maintenance.
More about this course+
Fee and funding
Full Price: €1,550; I4S Price: €1,085. Eligibility Criteria: Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
Length
6 Days
Dates
Funding available to Irish private-sector professionals and registered sole traders
Recognition
QQI Level 6 Minor Award in Pneumatic and Vacuum Technology
Postgraduate Certificate in Modern Methods of Construction
Dates not publishedPostgraduate certificate
Level
Level 9
Length
One academic year
Where
Online
Cost
€4,250 · funding available
This 30 ECTS credit Level 9 Postgraduate Certificate in Modern Methods of Construction focuses on the latest advancements and sustainable practices in the construction sector. Delivered in a fully flexible format to accommodate working professionals, this one-year course offers modules in Sustainability Planning in Construction, Digital Construction Technologies and Modern Methods of Construction.
More about this course+
Fee and funding
Annual Fee €4,250; Per Semester €2,125; I4S 30% funding €1,487.50; Funding is limited and subject to availability at time of request; Funding is available only to successful candidate employed in the Irish Private Sector and registered Sole Traders, not individuals.
By attending this course, delegates will gain a comprehensive understanding of how to construct robust AI models, handle complex engineering datasets, and integrate these models into engineering workflows. Attendees will gain insight into leveraging measurement data for building robust predictive models, which can outperform conventional methods in accuracy and efficiency.
More about this course+
Length
1-day course
Dates
Available on scheduled dates. Contact details are on the provider’s page.
Programmable Logic Controllers – Allen Bradley Course
Dates not publishedCertificate
Level
NFQ 6
Length
6 days
Where
In person
Cost
€1,550 · funding available
PLC’s are at the centre of modern automation systems. If you can understand how PLC’s think and how they generate fault messages, then you can use them as a powerful diagnostic tool. Our PLC course will enable maintenance staff to interrogate PLC code to determine the cause of machine faults and hang-ups. The course is run using Allen Bradley PLCs and is intended for learners already familiar with RSLogix. If you are a beginner, we recommend you complete the Introduction to PLC’s module
More about this course+
Fee and funding
Full Price: €1,550; I4S Price: €1,085. Eligibility Criteria: Funding is available to the Irish Private Sector and registered Sole Traders, not individuals.
Waterford and Wexford Education and Training Board
Retrofit
Dates not publishedProfessional training
Level
Not stated
Length
Not stated
Where
Not stated
Cost
Not stated
This course will discuss the best ways to achieve energy efficient, high-quality NZEB buildings. It will also help you to think about the ways in which you currently work and any changes which _you_ might need to make yourself in the ways you carry out this work when retrofitting existing buildings.
This course will introduce you to a variety of ideas which are important in the development of quality NZEB buildings. Craftworkers and construction workers have a very important role to play with respect to many of these.
The aim of the Autodesk Revit Architecture Professional course is to teach delegates the principles of Building Information Modelling, through producing complete 3D architectural project models, introducing parametric building design tools and creating working drawings from the models.
More about this course+
Dates
For training dates and details please see our Course Schedule
Advanced Manufacturing Training Centre of Excellence
Subtractive Manufacturing Using CNC Robotics
Dates not publishedProfessional training
Level
Not stated
Length
2 days
Where
Not stated
Cost
Not stated
This 2 day course introduces learners to subtractive manufacturing using a 6-axis industrial robot and a 7th axis rotary table, covering steps required to prepare a part for milling, machining, trimming, and finishing on a Robotic CNC cell. This includes 3D toolpath generation within Autodesk PowerMill software, editing links and leads, collision and axis limits avoidance, converting the toolpaths into robotic programs and simulating programs before transferring and executing on a robot cell.
Advanced Manufacturing Training Centre of Excellence
Systems Integration and Robot Vision Systems
Dates not publishedProfessional training
Level
Not stated
Length
5 days
Where
Not stated
Cost
Not stated
This course will expand on the application knowledge fields of robot operation and programming to include theoretical contents from the fields of robot safety, cell design and configuration, vision systems, as well as fundamental legal aspects that need to be observed when commissioning.
Understanding ISO 19650 -1 and 2 Global BIM Standard
Dates not publishedProfessional training
Level
Not stated
Length
5 hours
Where
Not stated
Cost
Not stated
The ISO 19650 standard is an international standard for managing information over the whole life cycle of a built asset using building information modeling (BIM). It contains all the same principles and high-level requirements as BIM Level 2 and is closely aligned with the current UK 1192 standards. This course will cover the basics of ISO 19650 as a standard which is the global document supporting consistent delivery of information on a construction project. ISO 19650 was released to support the consolidation of information management processes, roles and requirements and is recommended for use in regions of the world where there are little to no standards in BIM.
Advanced Manufacturing Training Centre of Excellence
URAM Module 2 – Robotics Fundamentals and Application
Dates not publishedProfessional training
Level
NFQ 6
Length
Not stated
Where
Blended
Cost
Not stated
The module will provide an introduction to the use of industrial robotics and cobotics in manufacturing operations, their advantages and disadvantages, and how they can be used in a variety of applications providing an overview of their use cases.
Waterford and Wexford Education and Training Board
Ventilation
Dates not publishedProfessional training
Level
Not stated
Length
Not stated
Where
In person
Cost
Not stated
This course aims to provide learners with the principles and practices required to effectively design ventilation flowrates, install ventilation systems and commission ventilation systems, in accordance with Technical Guidance Document Part F 2019. Participants who successfully complete the assessment of this course can use this as proof of competency in ventilation systems’, installation, balancing and commissioning, as required by TGD Part F 2019. From the 1st of November 2019 (with consideration of Transitional Arrangements) ventilation design, installation and commissioning should be completed by competent people.