Courses from providers in Ireland and online. Build Digital does not endorse any course or guarantee its quality or suitability, so carry out your own due diligence before you enrol.
Global eTraining
Understanding ISO 19650 -1 and 2 Global BIM Standard
Dates not publishedProfessional training
Level
Not stated
Length
5 hours
Where
Not stated
Cost
Not stated
The ISO 19650 standard is an international standard for managing information over the whole life cycle of a built asset using building information modeling (BIM). It contains all the same principles and high-level requirements as BIM Level 2 and is closely aligned with the current UK 1192 standards. This course will cover the basics of ISO 19650 as a standard which is the global document supporting consistent delivery of information on a construction project. ISO 19650 was released to support the consolidation of information management processes, roles and requirements and is recommended for use in regions of the world where there are little to no standards in BIM.
Advanced Manufacturing Training Centre of Excellence
URAM Module 2 – Robotics Fundamentals and Application
Dates not publishedProfessional training
Level
NFQ 6
Length
Not stated
Where
Blended
Cost
Not stated
The module will provide an introduction to the use of industrial robotics and cobotics in manufacturing operations, their advantages and disadvantages, and how they can be used in a variety of applications providing an overview of their use cases.
Waterford and Wexford Education and Training Board
Ventilation
Dates not publishedProfessional training
Level
Not stated
Length
Not stated
Where
In person
Cost
Not stated
This course aims to provide learners with the principles and practices required to effectively design ventilation flowrates, install ventilation systems and commission ventilation systems, in accordance with Technical Guidance Document Part F 2019. Participants who successfully complete the assessment of this course can use this as proof of competency in ventilation systems’, installation, balancing and commissioning, as required by TGD Part F 2019. From the 1st of November 2019 (with consideration of Transitional Arrangements) ventilation design, installation and commissioning should be completed by competent people.
Purdue University's Virtual Design and Construction major is the nation's first bachelor's degree dedicated to preparing the next generation of digital builders. Through a dynamic, hands-on curriculum, you'll gain the technical expertise and real-world experience needed to shape the future of the architecture, engineering, and construction (AEC) industry.
More about this course+
Dates
Current academic-program page; start/availability dates not stated by provider
Waterford and Wexford Education and Training Board
Fundamentals For Plumbing
Dates not publishedProfessional training
Level
Not stated
Length
Not stated
Where
In person
Cost
Not stated
This course will provide the background to the issues of energy efficiency and quality in dwellings, as well as best ways of achieving energy efficient, high-quality NZEB buildings. It will also help you to think about the ways in which you currently work and any changes which you might need to make yourself in the ways you carry out this work.
IOSH Temporary Works Coordination Course Programme
Dates not publishedProfessional training
Level
Not stated
Length
2 days
Where
Online
Cost
Not stated
The aim of this program is to equip candidates with the knowledge to fully understand the legal responsibilities in regard to Temporary works, identify the roles and responsibilities required and guidance on how they might fulfil their role in line with legislation and best practice.
Professional AutoCAD Training Course for Designers and Engineers
Dates not publishedProfessional training
Level
Not stated
Length
Not stated
Where
In person · Online
Cost
Not stated
ENGDOC’s AutoCAD training builds practical 2D drafting skills within a professional design environment, focusing on real project workflows that align with industry standards.
Bachelor of Science (Honours) in BIM (Digital Construction)
Applications closedUndergraduate degree
Level
Level 8
Length
1 year
Where
Blended
Cost
Free or funded
The BSc (Hons) in BIM (Digital Construction) is a one-year part-time re-skilling programme which addresses a significant market deficit for construction professionals by providing them with the ability to use BIM technologies in discipline-specific modelling and multidisciplinary coordination contexts.
More about this course+
Fee and funding
Springboard Fee: €3,000. 90%-100% Funding Available. This course is funded under the Springboard+ initiative for 2026. Eligible (Employed): €300; Eligible (Unemployed / Returners): Free.
Length
1 Year
Dates
Commencement Date: September 2026. Applications for this course are now closed.
The Certificate in BIM and Lean Construction Management has been developed directly to meet the construction industry needs to deliver projects using BIM and Lean Construction methods. This 25 credit certificate programme (Minor Award) will provide the participants with an appreciation, knowledge, tools, and techniques for effective Project Management incorporating BIM and Lean Construction principles.
More about this course+
Fee and funding
Total Fees EU: €3,000; Total Fees Non-EU: €3,600. Partial funding may be available to successful applicants employed in the Construction, Manufacturing or Quarrying Sector through Industry 4.0 Skillnet.
Length
1 year
Dates
Start Date: September 2026. This course has now closed for applications for September 2026.
This programme aims to upskill an Architecture, Engineering or Construction graduate to be a skilled postgraduate with an understanding of the digitisation of Architecture, Engineering and Construction (AEC), Building Information Modelling (BIM), as well as the potential of digitisation in the delivery of Sustainable Energy Systems and Policies or Facility and Asset Management. The programme will focus on professionals from the AEC sector to enhance their skills in BIM and Information Technology (IT) and address a current skills gap in the industry.
More about this course+
Fee and funding
Part-time: €7,800. Applicants will be required to pay the course acceptance fee of €800 online if a place on a course is offered.
Length
1 Year
Dates
Course Start Date: 7th September 2026. Application Deadline: 31st August 2026.
The Master of Science in Building Information Modelling and Digital Leadership is a programme that will directly respond to a significant gap in national and international educational provision related to digital leadership across the built environment value chain.
The programme will provide a flexible, multidisciplinary, and industry-focused programme that will empower graduates to lead the transition towards a collaborative digitalised built environment.
More about this course+
Fee and funding
Total Fees EU: €6,000. Up to 40% funding available to the Irish Private Construction Sector and Sole traders. If you have studied at ATU before you may be eligible for the ATU Alumni Scholarship, with a 20% reduction in fees on eligible Level 9 masters courses.
Length
2.5 years
Dates
Start Date: September 2026. This course has now closed for applications for September 2026.
The Certificate in BIM Management is designed for professionals working across the built environment sector who wish to develop expertise in Building Information Modelling (BIM), digital construction and project management.
More about this course+
Fee and funding
In collaboration with the Government of Ireland through the Higher Education Authority (HEA), this course is available to 25 eligible learners with an 80% discount of the fees.
Master of Science in Applied Building Information Modelling & Management
Applications closedPostgraduate degree
Level
Level 9
Length
2 years
Where
Blended
Cost
€8,100
The MSc in applied Building Information Modelling and Management is a part‑time Level 9 programme designed to equip graduates to lead digital transformation across the built environment. The programme focuses on multidisciplinary collaboration, advanced BIM technologies, international BIM standards (including ISO 19650), lean methodologies, AI-assisted workflows and advanced digital construction strategies. It directly addresses national skills shortages and aligns with the BIM Mandate and the National Upskilling Roadmap 2030.
More about this course+
Fee and funding
EU Fees: Year 1: €2,700, Year 2: €5,400, €8,100 Total Fee
Length
2 Years
Dates
Commencement Date: September 2026; Applications for this course are now closed.
Recognition
Level 9 · 90 ECTS
Pace and booking
Part-time
Workload and assessment
90% online · 10% workshops · part-time over two years
This Certificate in Building Information Modelling (BIM) is a minor award within the very successful Higher Diploma in BIM has been developed in close collaboration with construction industry professionals to provide a flexible, multidisciplinary and industry-focused programme that seeks to address the current competency and skills gap in the construction sector both nationally and in a global context.
Building Information Modelling with Revit Architecture (Certificate L6, 10 ECTS)
Last listed date has passedCertificate
Level
Level 6
Length
10 weeks
Where
Not stated
Cost
€950
The programme will provide learners with a solid grounding in Building Information Modelling (BIM) using Autodesk’s Revit Architecture. This programme will encompass the basics of 3D building modelling & architectural visualisation. BIM functionality such as tables and building quantities will also be covered. This course will benefit existing AutoCAD users as well as those learning CAD for the first time.
More about this course+
Fee and funding
€950
Length
10 weeks
Dates
There will be an online welcome session for all students on 9th September 2026. Applications will close 2 weeks before the listed start date or once the maximum number of applicants is reached.
Recognition
Level 6 · 10 ECTS
Workload and assessment
One 3-hour online lecture per week · two continuous assessments and one project